聚合氯化铝对水体中双酚A 的混凝特征
- 张立中
-
0 次阅读
-
0 次下载
-
2020-03-21 09:44:42
文档简介:
中国环境科学2008,28(6):531~535ChinaEnvironmentalScience聚合氯化铝对水体中双酚A的混凝特征王梓松1,谢更新1*,曾光明1,张长1,马晓莹1,余健2(1.湖南大学环境科学与工程学院,湖南长沙410082;2.湖南大学土木工程学院,湖南长沙410082)摘要:以聚合氯化铝(PAC)作为混凝剂,探讨了双酚A(BPA)在模拟水体混凝过程中的去除效果和混凝特征.结果表明,在较低TOC浓度和浊度条件下,随着PAC投加量的增加,BPA的去除率呈先上升后下降的趋势,本实验条件下最优的混凝剂投加量约为BPA/PAC=1:2.6(质量比).pH值6.0~8.0时,混凝对BPA有相对较好的去除效果,此时水体中铝盐多核络合物的电中和是混凝的主要作用机理.原水中的腐殖酸类有机物和浊度物质对BPA的混凝过程有较大的影响,较高浓度的腐殖酸类物质会削弱PAC对BPA的混凝效果,而随着浊度的提高,BPA的去除率呈先上升后下降的趋势.关键词:聚合氯化铝;双酚A;混凝;絮凝体中图分类号:X131.2文献标识码:A文章编号:1000-6923(2008)06-0531-05CoagulatingcharacterofpolyaluminumchlorideonbisphenolAinwaterbody.WANGZi-song1,XIEGeng-xin1*,ZENGGuang-ming1,ZHANGChang1,MAXiao-ying1,YUJian2(1.CollegeofEnvironmentalScienceandEngineering,HunanUniversity,Changsha410082,China;2.CollegeofCivilEngineering,HunanUniversity,Changsha410082,China).ChinaEnvironmentalScience,2008,28(06):531~535Abstract:Usingpolyaluminumchloride(PAC)ascoagulant,theremovalefficiencyandcoagulationcharacterofbisphenolA(BPA)insimulatedwaterbodycoagulationprocesswasinvestigated.UndertheconditionoflowerTOCconcentrationandturbidity,withincreasingofPACaddingamounttheremovalefficiencyofBPAappearedthetendencyoffirstrisedandthenlowered.Underthistreatcondition,themostoptimalcoagulantaddingamountwasaboutBPA/PAC=1:2.6(massrate).WhenpHvaluewas6.0~8.0,coagulationonBPAhadappropriatelylevelremovalrate,inthistime,thecharge-neutralizingmechanismbypolynuclearaluminoussaltswasthemainactionmechanismofcoagulation.ThehumicacidtypeorganicmatterandtheturbiditymattersinoriginalwaterhadgreatinfluenceonBPAcoagulationprocess,humicacidtypematterofhigherconcentrationcouldweakenPAConBPAcoagulationeffect,andwiththeenhancingofturbidity,theremovalrateofBPAappearedthetendencyoffirstenhancingandthenlowering.Keywords:polyaluminumchloride;bisphenolA;coagulation;floc双酚A(BPA)是水体中典型的内分泌干扰物之一[1].近年来,许多国家都有地表水体甚至饮用水源中检出BPA的报道,而且随着BPA在环氧树脂与聚碳酸塑料工业生产中的大量使用,其检出浓度呈上升趋势[2-3].我国目前尚未开展大规模的BPA污染调查,但有报道显示,在武汉地区6个湖泊和2条河流中采集的11个样本有8个检出了BPA,检出浓度9.2~198.7ng/L[4].黄浦江原水的BPA浓度为0.17~3.52µg/L,以黄浦江作原水的水厂出水BPA浓度为0.14~0.58µ
评论
发表评论